Repair of brick stoves, often, may be required in such situations:
The thrust has deteriorated or completely disappeared or completely disappeared.
Cracks arose, because of which carbon monoxide penetrate the room.
To repair the stove, you can use the services of qualified masters. However, if you do not have this opportunity, then you can deal with yourself. Initially, the nature of the damage must be established.
Repair methods
The easiest solution is to close the cracks. Since the doors are mounted in the masonry process with bricks, you will not have to get them. It is enough to disassemble the solution next to the doors (until the brick is noticeable) and the cracks are thoroughly sealed. For this, a special solution is used. It is created from cement (1 part), sand (10 parts), as well as clay (3 parts).
The components mix well. It is important that the mixture becomes quite thick. With its help, you can carefully smear the seams near the doors. In addition, this solution is suitable with the aim of finding cracks present in the stove case. If it is plastered, then the crack needs to be scrapped to brick, and then brush it well.
Sometimes the owners can face a problem when there are a lot of cracks. In this situation, it will not be possible to solve the problem with conventional covers. Naturally, in this case, the optimal solution will be the overflow of the stove. However, if it operates properly or you simply have no time to engage in the oven shifting, then you can do the following. Firstly, the screed of the frame of the stove is formed. For this, ordinary metal wire is used. Secondly, horizontal channels are made in the furnace, the depth of which is from fifteen to twenty millimeters.
It is important that the channels are encircling the entire stove. The wire laid there must tighten the frame. When it is securely strengthened, it must be carefully pulled. For this, there is enough banal twisting of the material in several areas. An ordinary nail can help in this. However, you need to be as accurate as possible so as not to twist and not break the wire. Then you can start plastering the stove. For this, it is recommended to use the most wide spatula. In addition, it can have a special corrugated surface, which will add structures of greater aesthetics.
Want to order a furnace repair? Visit the site
