Almost every second person in our time has been affected by the problem of energy conservation. Naturally, before driving into a particular house, you first of all take care that all the necessary heating systems are present and work properly in it. But as it became known, one heating system is often not enough. It is for this reason that it is worth taking care to make external insulation of the walls of the building in a timely manner. Wall insulation will make it possible not only to significantly save money, but also to spend the whole winter in comfort and comfort. In this article, we will talk in more detail about the outer insulation of the walls.
Today, a huge number of construction companies are engaged in insulation of buildings. But you should know that such a service is not so cheap. That is why we will now tell you how to carry out the process of external insulation of the walls of the house. Insulation can be carried out both in the process of construction and on the building, which has already been standing for a very long time. In the process of insulation, you need to get insulation material, special anchors, screwdrivers, as well as construction forests. In the event that your house is built of brick, then installation will pass quickly and without complications. But if, in the construction, the Saman was used, or the building is plastered, then problems may arise.
Before doing house insulation, it is necessary to choose the right insulation directly. To date, the most common are polystyrene, mineral wool and polystyrene foam. All these materials have their own positive and negative qualities. For example, the foam will crumble, and damage it is quite simple. Therefore, it must be covered on top with plaster or siding. But there is a plus, this is an inexpensive material. Mineral wool can present inconvenience in the process of installation, but at the same time it is very good during operation.
Insulation of mineral wool.
In the event that you decide to be insulated using mineral wool, then you should know about all the features of installation. To begin with, you will need such materials and tools:
Metal frame;
Dowel;
Primer;
Glue;
Anchor;
Hammer.
First, fix the metal frame on the wall. After that, it is necessary to fix the mineral wool to it to glue. The last step is the primer of the wall. After everything dries, you can carry out the process of finishing.