Wallpaper is the main component of any repair and until they are pasted, the repair cannot be considered complete. Wallpapers work miracles and can coordinate the appearance of your room. Can both add spaces and reduce it. Why stick wallpaper? To make the room cozy and beautiful. Do not think that gluing wallpaper is very simple, but there is nothing complicated here. The wallpaper will not peel off and I will delight your eye if you follow a few simple rules. Play wallpaper should start with rolling. But first, it is worth checking the rolls for the identity of the drawings and the color shade. To measure the strip with a small margin, about five to ten centimeters. If the drawing should be selected, then in this case, each segment must be measured individually.
To glue the wallpaper, you need to use glue, which is fully consistent with the type of wallpaper. Glue should be applied to the strip evenly, after which the strip will begin to turn.
The surface, as a rule, begin to glue from the window. The very first lane should be glued strictly vertically, for which a plumb line is used or you can use the building level. For smoothing strips, use a roller or soft brush. Excess glue should be removed with a sponge.
When gluing corners, you should leave a small ledge, about three to five centimeters. Well, in order for the wallpaper to be tightly fitted to the baseboard at the ceiling, a special triangular profile should be used. At the same time, you do not stain the ceiling and skirting.
It is important enough at the time of the wallpaper drying out, to prevent a sharp temperature difference in the room and the presence of drafts should not be allowed, otherwise, the joints between the stripes may well disperse.