There is practically nothing difficult to create a waterfall on its own. The most important thing is to have free time, and also have a little zeal and perseverance. This design will consist of such elements:
The supply pump.
Pipeline.
Filtering systems.
Moisture reservoir.
Separate attention is deserved by the fact that by creating a waterfall on glass you can use special components, for example, the original backlight, collectors responsible for the normal separation of water flows, etc.
Review of the main elements
The main detail of the design is considered to be a pump. Its power must be chosen, take into account the height to which the water will have to be lifted. The volume of water in the system is also of great importance. The creators of inexpensive models in technical parameters often write the greatest power value that the device can process. However, this value is strongly high. Thus, you can safely take 8-15%.
The fact that the pump can process under perfect conditions deserves special attention. It provides for an insignificant height and pr. All this means that the equipment should be ordered with a certain margin. Additionally, the noise made by the installation must be taken into account. This plays a role if the waterfall is planned to be used in an ordinary city apartment.
The next most important detail of the design is the pipeline. If the waterfall is installed in the country, then this installation will not be difficult. This is due to the fact that a significant volume of water will pass through the street waterfall through the street waterfall. For installation, it is enough to attach a pipeline from a reinforced hose. When choosing its size, you should pay attention to the recommendations from the manufacturers of the pump.
If you are going to equip a waterfall in the apartment, then here the situation is a little difficult. Since the water will drain along some surface, you must seriously think about its optimal amount.
For example, if you plan to make a waterfall on glass, then the optimal surface size horizontally is 100 centimeters, vertically – 200 centimeters. In the case of choosing this design, remember that there should be a certain distance between the nozzles (at least three centimeters). This guarantees the optimal distribution of a water picture.