Parquet floor before cyclopics must be remarked, remove the pollution that formed and wipe a little with a damp cloth. The cycle is carried out along the bar, along wood fibers.
Want to know how attractions are being used now? You can find out this information here .
If this is the opposite, then there may be bullets. Parquet with a cycle is only protected, but this does not eveen the sages and the hollows. For alignment, some places must be cycle several times, and for this reason it will be easier to simply sharply sharply.
After this procedure, parquet of hardwood wood will become brilliant, and if the parquet is rubbed with mastic or covered with special varnish, then it gets a good glossy. Varnish and mastic can be purchased at a construction store.
Varnish coating and rubbing with mastic gives the opportunity to protect the floor from quick pollution, give the floor a beautiful shine, and the texture of wood is distinguished.
Different mastics are used for rubbing parquet. They can be diluted in advance with water, and then applied with a thin layer to the floor and grateed with a special polo or manually. For each type of mastic, there should be instructions, and mastic needs to be prepared and used precisely according to this instructions.
Some experts recommend rubbing a parquet from oak water mastic, and beech parquet with anhydrous mastic. Water mastic is diluted in dishes with thick walls with hot water. Mastic is applied to the floor with a brush with a thin layer.
