Any specialist will say how much the laminate laying in a particular room costs. To resort to his help from people makes a lack of time or lack of experience. In the second case, it can lead to the fact that the coating will be installed incorrectly. And this, in turn, means extra expenses for the acquisition of new material. Indeed, in some cases, the slabs of the described material after dismantling for re -use are simply unsuitable. Therefore, it will be much cheaper to hire a person with experience, so as not to create unnecessary problems for himself.
To date, the cost of laying one square meter should not exceed 250 rubles. So experts say. Below will be considered prices for the installation of the described type of material.
What affects the cost?
The cost of the aforementioned process depends on the styling method. In general, three such methods can be distinguished, different in cost:
Ordinary – the easiest option. The coating is installed along the surface of the walls. The cost of work is 150-200 rubles and depends directly on the size (meter) of the room;
non -healing – implies the installation of the coating continuously. That is, the plates are not cut into the thresholds, but move from one room to another. This increases the time of work and complicates it somewhat. Accordingly, the cost is also growing – 200-250 rubles per square meter;
Diagonally – sheets are laid at a certain angle (45 degrees), which leads to an increase in the consumption of the material by 6-12%. The cost in this case varies from 200 to 250 rubles, but some craftsmen can set the price of up to 300 rubles per meter of surface.
There is, however, an option in which the consumption of material with diagonal installation can be minimized. But you can consider it if you yourself do all the work. The hired master may, for example, do not own this technology. And experiments are a risk that everything will have to start over again. And due to the fault of the customer of work.
Factors leading to a rise in the cost of services
The rated rates involve the performance of work exclusively on the installation of the material on the prepared basis. If you need to carry out additional actions (for example, using the insulation as a substrate substrate), then the cost increases.
We give specific examples. The use of such insulation material as a foam leads to a rise in work by about 90-100 rubles on each square meter of surface. And, say, tile glue helps to increase the price of rubles by 80. Similarly, it affects the size of the cost and the need to dismantle the old coating, if there is a suspicion that a fungus has started in it. As a rule, the cost of dismantling is 100% of the price of installation work.
Therefore, the customer of the work can be advised to discuss in advance with the contractor the nuances of the cost of all possible types of work that may be needed during the described process.