In almost every construction, construction solutions are used. Most often these are solutions based on cement of sand and graphimas. Many people know what it is and even once made them on their own, but they can hardly boast of professionalism in this matter. Surely someone always spends a lot of time when kneading, but someone simply does not manage to knead evenly. The process of manual preparation of the solution is extremely simple. Moreover, this does not require a trough at all or something is similar, even and wide concrete coating is quite suitable. We will talk about the so -called Uzbek technology for stirring the solution. By the way, before such a batch, shovels were not used, this was done by means of large hoes. By the way, now a waterproofing of the pool bowl is often done by specialists.
Mixing the solution begins with the rash of the required amount of sand and cement to the concrete, if a concrete solution is kneaded, then graphics. Then all this is mixed on dry. Should be mixed as follows. From the heap, you need to gradually take the contents on the shovel and pour nearby, if the heap is large, then pour on the far edges of the same heap gradually moving it from one place to another.
Moreover, pour the mass to the very top of the new heap, only so the new mass will be distributed along the embankment and is evenly mixed. Continue such stirring you need to until the solution acquires homogeneity. After that, in a heap, you need to make a deepening to about half.
As a result, it should be formed that it seems like an extinct volcano with a big crater. This crater is necessary to pour water. Water must be poured slowly, and even more so not the entire calculated amount, but about 80% of the necessary. Then you need to let the solution soak in leaving it for a while. Then it remains to take a shovel and complete the case to the end.