Today, a natural stone is used in construction more and more often in construction. This is not easy, because it is an excellent decorative material that has high strength, reliability, as well as wear resistance. Before installing natural stone, it is subjected to special processing. As a rule, the stone is processed thermally or mechanically. These procedures are necessary for the material to be safe and easy to work.
Also, decorative processing of natural stone is also popular now. After such processing, you can get the necessary surface type. The sawn surface is obtained, for example, when processing the material by cutting. This surface is very rough. A stone with such a surface has a low cost, and it is used, as a rule, in external works. In order to reduce roughness in sawn stone, you need to polish it. After this procedure, a material is obtained that can be used not only in external work, but also in internal. The next stage of processing of the material is called clapping. Cutting is done using abrasive circles of special purpose. After this procedure, the stone can use in all types of work.
In order for the material to have a mirror surface, it is subjected to special polishing, which is carried out using felt circles. As a result of such processing, the stone receives a perfectly flat surface and can only be used in internal work. Of course, after each processing, the material not only acquires the best surface, but its value also increases. Natural stone is a material that has been used in construction for many, many years. Its reliability and strength out of competition.