There are fewer and fewer days left, before the opening of landing work in personal plots. The well -known fact is that the key to an excellent crop depends not only on planting material, but also on the place where all this is waking up to germinate.
The greenhouse is an inconsistent design of any gardener, for this reason, she should pay special attention to her.
Winter frosts, snow, rains and wind – could adversely affect the condition of the greenhouse. Well, and, of course, pests, with the onset of heat, will again begin active life, destroying plantations.
What are the necessary manipulations should be carried out?
1. Thorough inspection all structures from coating to frame.
If it is made of wood, then rotten or broken parts should be replaced with new. Metal – examine for corrosion, when it is detected, rust must be cleaned, and this place is degreased and tinted with a color.
2. Correct natural damage.
From the severity of the snow, the base of the greenhouse or its coating could bend, straighten this defect, and if necessary, strengthen this place in addition. If the walls are filled, examine them for a rupture, with a positive result, eliminate the formation using tape, glue or put a patch. Dark spots are possible on a polycarbonate, in which case the affected sheet changes.
3. Clean the ridges.
Not all gardeners, after harvesting, remove the remains of plants, but they could become a haven for various pests. Therefore, having pulled out the remains, put them in a compost hole, it is advisable to immediately burn them.
4. Remove the upper soil.
The lesson is not simple and laborious, but necessary, since various parasites and infectious microorganisms are already there. You can replace these actions only by disinfecting the surface. To do this, the entire perimeter of the greenhouse is dug up several times and immediately spilled with a solution of copper sulfate or burgundy liquid.
5. Invigorating shower.
Any item has the ability to get dirty and the greenhouse is no exception. Old leaves, dust, sticky insects – all this can be found on the surface. You can remove all this with soapy water and brush, you need to clean both outside and inside. And rinsing with cool water from the hose, will help to clear those places that did not work out to reach.