The closer is a very convenient device. He closes the door himself without unnecessary noise. If you install a closer, you will always know that your door is closed. The closer can be installed both hidden and hydraulic. In this article you will learn how to install a closer with your own hands.
You need to get tools.
Actually the closer himself. Pencil, screwdriver, pliers and drill.
We get to work.
Installation of the Dorma TS 92 B closer should start from the side where the loops are at the door. Make a note where the closer will be installed. Then you need to measure what is the length of the closer cylinder. It is necessary that you do not drill a hole deeper. This length must be transferred to the drill and put a mark. Thus, having reached this mark, you will not need to drill further. Now you can drill a nest.
Now you need to take the closer cylinder and insert into the nest. In this case, the fastener will have to press the door to the door. Circle the plate, make its outline on the canvas. Now take out the cylinder and see the sketch on the doorbell of the door. On this contour, you need to make a cut so that, then the plate could be drowned in this gutter.
Now you need to insert the cylinder again. Take the marker and spend them at the edges of the plate. And now close the door towards the slope and press it to it. You have a paint from the marker should leave the plate circuit on the slope. Then pull out the cylinder and, in order to clearly become a more contour on the slope, attach the structure to it and circle.
Where the print was formed, too, you need to make a cut. You will also drown the plate in the gutter resulting.
Now you need to insert the cylinder into the nest and fix it. Now one part of the closer is attached you need to fix the second. To do this, take the pliers and pull the outer part of the plate from the internal. Having pulled the closer, you should have a chain you need to be attached to the closer of the closer, and then the outer plate should be attached to another hole that is on the slope.
When the closer is completely attached, you need to remove the lock and check how the closer works. That’s all there is nothing difficult. Now you will know how to install a closer with your own hands.
